The FUSION

Automatic Channel Letter Machine. The only machine in the world with a patented interchangeable roll forming and clamping brake bend die. Our Roll Forming design creates a smooth continuous radius and our Clamping Brake Bending Dies make for a sharper bend during break bends. CLN has reduced the waste in building a channel letter, by moving the shear to the end of the bending process we can cut the artwork from the coil after the final bend is made. With our knowledge in the sign industry we have program this machine to install a step-down bend for all seam pieces that fall in the middle of the return. We also incorporated a 1/4″ hole punch for weep holes. With this machine you can build “open face” or “reverse metal” letters with one easy process. This all in one machine will reduce your labor, decrease waste, and increase your profits. Fabricate letters in record time!

SPECIFICATIONS:

Feed Rate: 1200 IPM
POWER REQUIREMENTS
ELECTRICAL:
220 Volt / 60 HZ USA Locations
230 Volt / 50 HZ European Locations
AIR:
80 PSI / 1 CFM (Regulator Included)
MATERIAL TYPE:
Aluminum .030/.063
Stainless Steel or Galvanized Steel 20 Gauge
MATERIAL DEPTH SIZE:
1′ to 6″
BENDING MINIMUMS:
Sharp Bends from Positive to Positive .25
Sharp Bends Positive to Negative .4
Sharp Bend Angle 1 to 120 Degree
Radius Diameter .15
FLANGE SIZE:
.5 Standard attachment for the Letterlok Equipment
.25 Used with attaching with a Spot Welder
No Flange used when mig welding for reverse metal letters

The Fusion with its precise and accurate software, it can fabricate a variety of profile letters. Open Channel, Reverse Metal, and Trim-Less.

HTML Snippets Powered By : XYZScripts.com